What does an electrician cost in 2026?

In brief

• An electrician normally costs 900-1,500 kr per hour.
• Call-out and service vehicle often cost 400-1,200 kr.
• Small electrician jobs typically cost 2,000-6,000 kr in total.
• A new socket often costs 1,500-3,500 kr.
• A new circuit usually costs 4,000-7,000 kr.
• A new or upgraded fuse box costs roughly 15,000-35,000 kr.
• An EV charger fully installed often costs 11,000-25,000 kr.
• Evening, weekend and emergency jobs can cost significantly more.
• Work on the fixed electrical installation must normally be carried out and documented by a registered electrical contractor (registrert elvirksomhet).

Typical electrician prices in 2026

The price differences can be large. A new socket on an open wall, for example, is easier to install than a concealed point where the electrician has to pull new cables through the wall.

So ask for a specific price based on your home and the work that will actually be carried out.

What is included in an electrician's price?

The hourly rate is only one part of the equation. The total price can consist of:

It is therefore entirely possible to book a small job that takes less than an hour and still end up with an invoice for several thousand kroner.

The electrician has to travel to your home, collect materials, secure the work area, do the job, test the installation and document the work. All of this takes time, even when the installation itself is quick.

Why is the first hour so expensive?

Many electrical firms have a minimum price or invoice at least one hour. On top of that there are often costs for call-out and service vehicle.

An example might look like this:

It can therefore pay to combine several small jobs in the same visit.

If you are already having a socket replaced, you can have a dimmer installed, a thermostat checked and an unstable lighting point examined at the same time. That way you only pay the call-out fee once.

Hourly rate or fixed price - which should you choose?

Hourly rate

An hourly rate is often suitable for fault finding and smaller jobs where it is hard to know how long the work will take.

The advantage is that you pay for the time actually spent. The disadvantage is that the final price can be hard to predict.

Ask the electrician to state:

Fixed price

A fixed price works well when the job is clearly defined. That could be, for example, installing an EV charger, replacing a fuse box or installing a set number of electrical points.

The advantage is that you know the price before the work starts. Still, make sure the quote describes exactly what is included.

A cheap quote can end up more expensive if necessary parts of the job have been left out.

Price estimate

A price estimate is not the same as a fixed price. The Norwegian Consumer Council (Forbrukerrådet) states that, as a general rule, a price estimate cannot be exceeded significantly, and never by more than 15 percent, unless you have expressly agreed otherwise.

Ask for all additions to be approved in writing before they are carried out.

What does it cost to install a socket?

The price of a socket depends on whether the electrician is replacing an existing outlet or installing a completely new point.

Replacing an existing socket often costs between 1,000 and 2,500 kr. If the electrician has to pull a new cable or create a new point, the price can be between 1,500 and 3,500 kr per outlet.

The price is affected by, among other things:

With several similar points, the price per socket is often lower. The call-out and preparation are then spread across several installations.

What does it cost to install a light fixture?

A simple light fixture installation usually costs between 1,500 and 4,000 kr.

If a suitable lighting point already exists, the job is fairly simple. If the electrician has to create a new lighting point, pull cables or install a switch or dimmer, the price will be higher.

Large or heavy fixtures can also require extra mounting work. The same applies to downlights, integrated lighting and smart home solutions.

Before the electrician arrives, you should:

Good preparation reduces the time spent and therefore also the cost.

What does a new circuit cost?

A new electrical circuit often costs between 4,000 and 7,000 kr. The price can be higher if there is a long distance from the fuse box, a difficult cable route or a need for work inside the fuse box itself.

A new circuit is often needed for:

The electrician must first assess whether the fuse box and the main fuse have sufficient capacity. If the installation is already heavily loaded, a larger upgrade may be necessary.

What does it cost to replace a fuse box?

A new or upgraded fuse box usually costs between 15,000 and 35,000 kr.

The price depends on:

In some homes it is enough to refurbish the contents of the box. In other cases it makes most sense to replace the whole box.

Old screw-in fuses do not automatically mean the installation is dangerous, but an old installation can be poorly suited to today's electricity consumption. EV charging, induction hobs, tumble dryers and electric heating can load the installation far more than it was originally designed for.

What does it cost to install an EV charger?

An EV charger fully installed often costs between 11,000 and 25,000 kr. For a simple standard installation, the price can be at the lower end of the range.

The price goes up if:

Ask for a fixed price that clearly shows what is included. Some packages have limits on cable length, drilling and digging. Anything beyond the standard package can cost extra.

What does electrical work in a kitchen cost?

Electrical work in a kitchen often costs between 10,000 and 40,000 kr.

A simple project where the existing points are kept can cost less. If the whole kitchen layout is moved, new circuits, sockets and connections may be needed.

Common electrical work in the kitchen includes:

It is important to plan the positions before the kitchen is ordered. A socket that ends up behind a cabinet, or a circuit that is missing when the kitchen is fitted, can lead to unnecessary extra costs.

Send the electrician the kitchen drawings early. That way the firm can plan circuits and points before the fitting starts.

What does electrical work in a bathroom cost?

Electrical work in a new or fully renovated bathroom often costs between 25,000 and 60,000 kr.

The price depends on the size of the bathroom and how much equipment is to be installed.

Common costs are:

Electrical work in a bathroom has to be planned together with the other trades. The electrician often needs to come in both before and after the walls and floor are finished.

Fixed heating cables cannot be laid by unqualified people. The Directorate for Civil Protection (Direktoratet for samfunnssikkerhet og beredskap, DSB) specifies that laying, installing and connecting fixed heating cables must all be done by professionals.

What does it cost to install heating cables?

The installation of heating cables itself is often priced at roughly 1,000-1,500 kr per square metre. Small rooms can have a higher price per square metre because parts of the work have to be done regardless of the size of the floor.

A thermostat, a new circuit, floor build-up and other work may come on top.

For a five square metre bathroom, the electrical part of the underfloor heating can cost between 8,000 and 15,000 kr, for example. The total cost can be higher if the fuse box or the circuit has to be upgraded.

What do fault finding and an electrical inspection cost?

Fault finding or an inspection of an electrical installation usually costs between 2,000 and 5,000 kr.

The price depends on the size of the home and how easy the fault is to find. Some problems are discovered quickly, while others require measurements on several circuits, connection points and appliances.

You should contact an electrician if:

In the event of smoke, fire risk or a strong smell of scorched material, the power should be switched off if this can be done safely. Call the emergency services if there is immediate danger.

What affects the electrician's price?

Where in the country you live

Price levels are often higher in Oslo and other large cities. Competition, travel distance and local demand still affect prices, and there can be big differences between firms in the same area.

How easily the electrician can get access

Surface-mounted cabling is normally cheaper than concealed installations. If the electrician has to open up walls, work in the loft or pull cables through several rooms, the time spent increases.

The age of the home

Older homes can have cables, fuses or solutions that are not compatible with modern equipment. A small change can therefore reveal the need for larger upgrades.

The materials you choose

Standard switches and sockets are cheaper than exclusive design ranges and smart home products. The price is also affected by quality, features and availability.

The timing

Planned work during normal working hours is usually the cheapest. Evenings, weekends and emergency call-outs can cost significantly more.

The size of the job

A larger, well-planned job can give a lower price per point than many small visits. The electrician spends less time on driving, planning and administration.

Three examples of what the electrician's bill can come to

Example 1: Several small jobs in an apartment

The work consists of replacing one socket, installing a dimmer and connecting a ceiling light.

Example 2: Electrical work in a new kitchen

The customer needs a new circuit for an induction hob, a stove guard, six sockets and lighting under the wall cabinets.

Example 3: EV charger and installation upgrade

The customer wants an EV charger, but the home lacks surge protection and needs a new circuit.

The examples are not quotes. The actual price has to be calculated based on the home and the installation.

What can you do yourself?

There are some minor electrical tasks private individuals can do themselves. DSB states, among other things, that you can:

Work that is not on DSB's list must be left to professionals.

Among other things, you cannot install sockets, lay fixed cabling, create new circuits or lay fixed heating cables yourself.

If illegal work leads to damage or fire, it can also have consequences for your insurance settlement.

Check the electrician before you sign an agreement

It is the business, and not just the person who turns up, that must be authorised to carry out the work.

So check the company in DSB's Register of Electrical Contractors (Elvirksomhetsregisteret). There you can see whether the business is registered for the type of electrical work you need.

You should also check:

Avoid undocumented favours from friends. Even if the person is a trained electrician, work in other people's homes must normally be carried out and documented through a registered electrical contractor.

What documentation should you receive?

All work on the fixed electrical installation must be documented. After the work you should receive the relevant documentation, including:

The declaration of conformity confirms that the installation has been carried out in accordance with the applicable safety requirements. The documentation must be kept for the lifetime of the installation.

It can become important when selling the home, in insurance cases, during later renovations or if a fault occurs.

Do not close the project without checking that you have received the documentation.

How to get a more accurate price

Send the same job description to several electrical firms. That makes it easier to compare the quotes.

The job description should include:

Ask for the quote to separate labour, materials and other costs.

Also ask what is not included. This is often where the biggest misunderstandings arise.

How to save money on an electrician

Combine several tasks

Make a list of all the small electrical problems in your home. Once the electrician is on site, it can be cheaper to have several tasks done at the same time.

Send good photos

Photos of the fuse box, the existing installation and the work area make it easier to give an accurate quote.

Plan early

The electrician should be involved before walls are closed up and kitchen or bathroom fittings are installed. The wrong order can lead to extra work.

Choose standard products

Standard switches, sockets and dimmers are often cheaper and easier to source than special products.

Do the preparation you are allowed to do

You can clear the area, move furniture and make sure there is good access. Always check with the electrician before doing any other preparatory work.

Avoid emergency call-outs

Book during normal working hours when possible. Emergency jobs in the evening and at weekends can have a significantly higher hourly rate and call-out fee.

Agree additional work in writing

If the electrician discovers something that was not included in the quote, you should get a price before the work continues.

Safe agreement and payment

A good agreement should describe:

Do not pay large amounts in cash. Traceable payment gives better documentation if you later disagree.

For larger jobs, the payment can be split according to agreed milestones. That reduces the risk for the customer, while the electrician gets paid as the work progresses.

Fikso is built to make this process safer. The customer secures the payment before the work starts, while the money is paid out in line with the agreed process. If a disagreement arises, the payment can be held back while the case and the documentation are reviewed.

Frequently asked questions

Conclusion: What should you budget for?

In 2026 you should expect an electrician's price of roughly 900-1,500 kr per hour. For a typical smaller job, a realistic total budget is between 2,000 and 6,000 kr.

Larger installations can cost considerably more:

The most important thing is not just to find the lowest price. The company must be registered, the work must be documented, and the quote should clearly show what you are actually paying for.

A good description, several comparable quotes and a written agreement give you far better control over both the costs and the result.

Method and sources

The prices are indicative estimates based on publicly available price guides and published prices from Norwegian electrical firms and suppliers. Price levels vary by location, materials, accessibility and scope.

Rules and consumer information have been checked against:

This article provides general information and does not replace a specific assessment or a quote from a registered electrical contractor.